Check you'll got the microphone correctly aligned with the grilles in the roof light fitting.

 

Is there a proper way to clip the mic? I saw that you can clip ot to have the wire going toward passenger, or toward driver. Does the mic is angled toward the driver internally?

 

It's an easy swap to switch it with the wire going the other way, so why not try it?

 

I will... just asking before prying, cracking and crying

 

Well, it seem's there is a way on the mic. There is an arrow on the mic that is supposed to point toward the driver (meaning the mic wires are on the passenger side). I opened the mic to see the internals, and it's not very well made (aka piece of cr@p).
anyway, by changing it to the right side, i've gain a tiny bit of volume in my voice, but still, it is sounding like i really far.
Guess i'll be looking for another mic, i've heard the 2010 are better!

 

Adjust sensitivity with vag-com. Everybody who I speak to cant believe I am using car bluetooth

 

Adjust sensitivity with vag-com. Everybody who I speak to cant believe I am using car bluetooth

I didn't know there was that option. Do you know where, what module/channel to what value?
thx

 

Never mind. I found this on the web.
adaptation
A128,0,Output Volume
A128,5,Output Volume
A128,6,Basic Output Volume Adjustment
A128,7,
A128,8,0 = ±0 dB / 1 = +1 dB / 3 = +3 dB / 6 = +6 dB
A128,9,128 = -1 dB / 130 = -3 dB / 133 = -6 dB
;
A129,0,Afterrun Time
A129,5,Afterrun Time
A129,6,The time the mobile phone plate is active after "Ignition OFF".
A129,7,
A129,8,Range: 0...6 (30 Seconds to 30 Minutes)
A129,9,Increments: 1 = 5 Minutes (0 = 30 Seconds)
;
A130,0,Delay Time (Audio Components)
A130,5,Delay Time (Audio Components)
A130,6,Adjustment of the delay times to compensate the
A130,7,audio component delay and acoustic running times.
A130,8,
A130,9,Range: 0...12 ms
;
A131,0,Microphone Sensitivity
A131,5,Microphone Sensitivity
A131,6,Microphone Sensitivity Adjustment
A131,7,Range: +0...+6 dB
;
A132,0,Speed Dependent Volume Adjustment (GALA)
;0
;
A133,0,Bluetooth
A133,5,Bluetooth
A133,6,0 = Bluetooth OFF
A133,7,1 = Bluetooth ON
;
A134,0,Hands Free Function
A134,5,Hands Free Function
A134,6,0 = Hands-free active while Bluetooth connection is active but without cell phone engaged
A134,7,1 = Hands-free only active with cell phone engaged
;
A135,0,Bluetooth Pass Key
A135,5,Bluetooth Pass Key
A135,6,Set the 4-digit Bluetooth pass key using this channel.
;
A136,0,Delay Time (Voice Control)
A136,5,Delay Time (Voice Control)
A136,6,Adjustment of the delay time between mute signal
A136,7,and start of the voice control recognition.
A136,8,
A136,9,Standard: 5 (= 0.5 Seconds)
;
A137,0,Bluetooth Visibility Time
A137,5,Bluetooth Visibility Time
A137,6,Time for which the Bluetooth Telephone Preparation
A137,7,stays visible for other Bluetooth Devices. After
A137,8,this time only previously connected Devices can
A137,9,connect to the Bluetooth Telephone Preparation.
A137,10,
A137,11,Range: 0/1...30 Minutes
A137,12,Standard: 0 (always visible)
;
A138,0,Voice Control Volume
A138,5,Voice Control Volume
A138,6,This Channel allows to alter
A138,7,the Maximum Voice Control Volume.
;
A139,0,Call Volume
A139,5,Call Volume
A139,6,This Channel allows to alter
A139,7,the Maximum Call Volume.

 

Mister W,

Did you have any success with increasing the microphone sensitivity?

 

Didn't seem to changed anything. Maybe a bad microphone or connection (wires or piggybacking) i have.
I set it at +6db, that is maximum. Maybe it should be - 6db to change something. I should made more test, if my GF stop taking my Audi