Audi Forum banner

Wiring for Sirius SAT for non equiped car

776 Views 1 Reply 2 Participants Last post by  AudiA4B6US
Buddy of mine is running US flash s/w in his nav+ has the new Sirius SAT receiver but doesn't know which cable to run to operate this. I am not familiar with SAT since I do not have it looking for some info. Thanks all.

Seem to think it has to do with the cable used for CD changer.
1 - 2 of 2 Posts
He will need to run 12V+, GND, Audio left/right/gnd and CAN high/low to the SAT receiver. Similar to NSX JR's install guide here.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.