Just to clarify, I have a EURO "C" that has been converted and a XM reciever that was previously hooked up to my Symphony II stereo. If I understand correctly the XM module should work... I see the XM option on the RSN-E but it only give me an initialization screen, then errors out. I put the VAG-Com on the car last night to see I was missing any settings, but everything looked ok. Please let me know if I am missing something here.
No ....XM receivers for Symphony and RNS-E are different.
With current XM receiver you will see only INITIALIZATION screen and if you lucky you will hear one of the stations without possibility to change it.
This list of phones has been tested in the UK with an EU RNS-E running the 2005_2 SW 0360 and FW 050. You may find differences with lower revisions of SW or US devices.
So far paired and Hands free profiles for...
Today I recieved a brand new 2012 bjarne CANGATE, and I have doubts about it's installation, first of all how I can configure the CANGATE, it has to be with vag-com or directly with the usb port?
And the other question is, now i have te RNS-e coded in A6 4B with the CANGATE i have to...
I have an OEM Audi Bluetooth module (8P1 862 335 A) added to my RNS-E in my B6 A4. I also have a Ross-Tech Hex+CAN USB cable along with the latest version of VCDS (126.96.36.199). When scanning the control module (77 Telephone), I'm getting the following error:
I did a lot of search and saw some similar problem reported but could not find the solution unfortunately.
I have a databus error in my setup after recent retrofit work.
01305 - Databus for Infotainment
004 - No Signal/Communication - Intermittent
Here is where I started:
i got an AMI unit from an R8 (came without any harness) and I built my harness myself. I found all the necessary information here on this site but one question remains slightly unclear. Do the 3 audio wires from AMI that go to 32 pin connection at the back if RNS-E connect to NF-in or AUX NF-in...