Audi Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
I replaced a standard steering wheel with one that has up/down tiptronic buttons. I referred to the following http://wiki.ross-tech.com/index.php/Audi_A4_(8E)_Steering_Wheel#Coding to try and code the wheel to recognize the buttons. Currently they do not function and they are not lit up.

This is my current coding




however when I recoded the module to 01141 it changes nothing. No fault codes either way. Any one have any ideas. btw, the new steering wheel is the same that is in the Ultrasport model. Car is 2005 A4 B6 1.8TQ Tip. If anyone has a car like this and can let me know what there steering module is coded at that would be helpful as well

Thanks
 

·
Registered
Joined
·
479 Posts
Mine is coded 04111 on a 2005 A4 Cab B6 2.4 V6

Before I fitted the RNS-E it was coded 02111

So, 04111 =

0 = Always
4 = MFSW + Radio + Phone + Voice,......2 = MFSW + Radio, 3 = MFSW + Radio + Phone, 5 = MFSW + Radio + Voice
1 = Paddles,..........................................0 = no paddles
1 = On Board Computer,.......................0 = No CPU, 2 = Cruise, 4 = CPU & Cruise
1 = No Rear Wiper (Cabrio),..................0 = Rear Wiper (Saloon/Avant)

Dave
 
1 - 2 of 2 Posts
Top