Audi Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Anyone know how to set up the usb cradle, have installed as per instructions on disk but keeps saying cannot start code 10. Also where can Iget a adpater cable from the phatnoise box to audi a4 satnav rns-e uk westmidlands audi asking £43!!!!
 

·
Registered
Joined
·
3,759 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #3
phat

Hi thanks for the response fitting in glovebox so short lead required Pete
 

·
Registered
Joined
·
3,759 Posts
From what you described in your PM, you have an Audi boot lead to adapt onto the CD changer for the boot.

Although this lead is rather long, it will plug into the 20 pin harness of your car, poputating the pins where the CD changer lead should go. And as long as your RNS-E harness has the CD wiring it will work.

http://shop.kufatec.de/product_info.php/cPath/47_51/products_id/114

Alternatively, when I buy my next bunch of phatnoises I can swap your Audi boot lead for glove box lead if you'd like. Then all you would need is this.

http://shop.kufatec.de/product_info.php/cPath/47_51/products_id/216
 
1 - 4 of 4 Posts
Top