Audi Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Ciao To Everyone,
I have download and recorder the Map Nav-plus Esten Europe,after the software update completed the system can't recognize the DVD Map Older (this is ok) but don't recognize the same CD used for upgrade the software.
Is there any thing that I can do?
If I buy the new CD my navigation retart to work again?
I hope that someone can help me.
Thanks in advance,
Ciao Andrea
 

·
Premium Member
Joined
·
11,350 Posts
Try using a head cleaning DVD.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #3 ·
Ciao PetrolDave,
I have seen that after the dvd load the system recognize the DVD as DVD update 406.
Probabilly I need to chanche someting in the setting using VAG com but I haven't it.
Do you think that If I disconect the battery and reconect the system recognize correctly the DVD as DVD Map?
Thanks a lot for you help,
Ciao Andrea
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #4 ·
Ciao PetrolDave,
Please conside that I'm using the Euro version with Euro DVD .
COMMENT=High;
DISC=P2N060922;
MAP=EN0506
SOFIDX:0460
NAVVER:V220066F
AUDVER:A2210134

I have note that the systen continus to recognize the DVD inserted as Update 460 instead of map.
IS there any way to change the update flag without VAG com?
Thanks Andrea.
 

·
Registered
Joined
·
6,767 Posts
Use an original DVD or follow the instructions elsewhere on this forum on how to create a working backup.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #6 ·
Ciao PetrolDave,
The forum is Big ,may you indicate to me the link ?
Today is the first time that I'm in this forum.
Thanks in advance for your help,
Ciao Andrea
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #7 ·
Ciao PetrolDave,
I'm using NEC 3540A Rev 1.04. with Verbatim DVD+R DL.
The updated was worked .
The causes could be the recorder?
I have seen that a lot of people using Pioneer 111D.
Thanks Andrea.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #8 ·
the system recognize the dvd us a Update DVD.
is there anything that I can do.
I have seeen alot of post but I need your help.
Is there any change to update the software and fix this issue?
Thanks,Andrea
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #9 ·
Ciao PetrolDave,
I need one courtesy from your syde:
This is the sistuation of my Navigation system:
After the software update (using DVD 2006) this is the sistuation:
SW:460
HW 57
The system now recognize the DVD 2006 used for make the update as 460 Software update cd/DVD when the system is open and when the pannel is closed sayd"Please insert the navigation DVD" .I have tryed my old DVD(8P0 919 884 B) and the system invite me to contact Audy.this is the message that appear "the Navigation DVD you have inseted is not compatible with the system software"
Today I have been in AUDI deeler (in Italy) that have asked to me 340€+Vat for DVD and 100 € because my Navigation system is blocked and they need to remove and repair.I have seen that when use the old dvd in the screen of the instrumental panel the compass is working correctly.
I hope that you or other people can help me to resolve this misterious problem (for me) and give me the possibility to save all these money.
Thanks in advance for your support,
Ciao Andrea
Other info:
Please consider that I have recorded the DVD (Verbatim ) as forum suggest using clone CD and NEC 3540A modified for enable booktype.
 

·
Registered
Joined
·
6,767 Posts
To use your old "B" DVD go to your dealer and tell him to change with his VAS tool in address 56 adaptation channel 97 to 1. This will make the RNS-E to load the old software from your old DVD and the old DVD will start working again. Or get a new DVD (2005_1 or newer) that will work with the 0460 software that is currently installed on your RNS-E.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #11 ·
may you help me to understand where i Have missed to make the DVD copy?
I have tried many times to burn DVD but I don't understand in which step i have mistake.

The only easy way is to buy the new DVD?
it's really expensive ,is there any other way for resolved the problem?
I want to try the possible before to take the decision to buy the DVD.
Please help me and I will be grateful
 

·
Premium Member
Joined
·
11,350 Posts
Try reading the thread on copying the DVD - it's not simple, you need to use both the right software on the PC AND the correct DVD burner drive.

The EU DVD's are copy protected, to make it difficult!
 
1 - 12 of 12 Posts
Top