Audi Forum banner

TV Tuner Aerial System

1K views 2 replies 2 participants last post by  Dave.G6HNI 
#1 ·
Does anyone know how the Diversity Aerials are connected to the TV Tuner in an A4 Cabrio boot lid.

I can find lots of part numbers for TV related bits but without a diagram or similar I can't see if I've identified everything I need and more importantly how it all connects together.

Dave.
 
#3 ·
Well the 2 black & 2 green connectors are all aerial inputs, don't think it matters which you use, as for the aerials themselves, as they are not OEM I can't be sure but red is prob +12v & black is ground.

With the Audi OEM system all 4 i/p's are fed from the Diversity Switcher £100 via a cable harness £150 from two Diversity Amps £180, which is why I have paused my install.... £100 trim + £100 switch + £150 harness + £180 Amps = 1 whole heap of cash !

Dave
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top