Audi Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
479 Posts
Discussion Starter · #1 ·
Does anyone know how the Diversity Aerials are connected to the TV Tuner in an A4 Cabrio boot lid.

I can find lots of part numbers for TV related bits but without a diagram or similar I can't see if I've identified everything I need and more importantly how it all connects together.

Dave.
 

·
Registered
Joined
·
43 Posts
not sure if we are in same situation, but im tring to connect my aerials to my tuner box also and aint got a clue, there are 4 wires(2 from each aerial) and a black and red for each(pos and neg)\??
 

·
Registered
Joined
·
479 Posts
Discussion Starter · #3 ·
Well the 2 black & 2 green connectors are all aerial inputs, don't think it matters which you use, as for the aerials themselves, as they are not OEM I can't be sure but red is prob +12v & black is ground.

With the Audi OEM system all 4 i/p's are fed from the Diversity Switcher £100 via a cable harness £150 from two Diversity Amps £180, which is why I have paused my install.... £100 trim + £100 switch + £150 harness + £180 Amps = 1 whole heap of cash !

Dave
 
1 - 3 of 3 Posts
Top