[AudiA4B6US]

Not really Navigation related but nevertheless a nice retrofit option. I learned recently that it seems to be possible to retrofit the TPMS in a B6, at least if the color DIS is installed. There is an interesting discussion over on AudiWorld which seems to indicate that it is possible.

Can the tire pressure monitoring system be retrofitted?

Maybe someone with the basic DIS can try this too and see what happens...
[siteimg:093f628bf1]151[/siteimg:093f628bf1]

 

[PetrolDave]

If someone can confirm the part numbers and quantities for a 2004 B6 I'll act as a "guinea pig".

From the list on AudiWorld

Controller: 4D0 907 273C
Sensor: 4D0 907 275 4x
Antenna: 4D0 907 277 4x
Valve: 4D0 601 361
Harness: 4B9 972 220D
Switch: 8E0 919 721

it's not clear to me what would be needed - and would I need to order equivalent 8E0 versions of the 4D0 parts?

ANyone with ETKA 6 who can lookup the numbers?

 

[AudiA4B6US]

I found a couple more part numbers but have no chance to confirm them or get the price:

8E0 907 273: tire pressure warning system control unit
8E0 919 721A: multiple switch for tire pressure monitoring system and/or auxiliary heater
1J0 972 977: flat contact housing with cap, 32pin
8E0 907 297B: hex nut with washer M6 (2x)
8E0 907 277: aerial rear bumper
8E0 971 934: flat contact housing, 4pin
8E0 907 525: holder for antenna rear bumper
N 104 128 01: torx socket head panel srew 5x16-R-N (2x)
4F0 907 275: wheel elctronic sensor (1x per tire), also use
601-60: metal valve 16"
601-70: metal valve 17"
601-80: metal valve 18"
601-90: metal valve 19"

No cofirmation or update on the Harness 4B9 972 220D.

 

[PetrolDave]

I'll see how helpful my (so far) friendly local Audi parts manager will be at sorting out what I'll need. Keep you posted ...

 

[Davidta]

Anyone making any progress with this project?

 

[PetrolDave]

TPMS goes on a different section of the CAN bus to the RNS-E - so this project is going nowhere.