Audi Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hi Guys,
just wanted to say thanks to this forum, I have successfully installed my RNS-E today even tho I had a little issue.

No sound, Mute Icon and hissing from the speakers.

But i found a post that spoke of the adapter haveing 2 wires TEL MUTE wires.
And as described I disconnected one of them and 'hey presto' everything works.

Just have to wait on my 2007 DVD hopefully arriving Friday so I can test the rest of it.

One question tho, the Adapter is for NON BOSE i believe as there is no wire on it from the BOSE pin.
My car has BOSE, so how can i get this working?

Cheers Guys.

Chris
 

·
Premium Member
Joined
·
11,350 Posts
Sno said:
One question tho, the Adapter is for NON BOSE i believe as there is no wire on it from the BOSE pin.
My car has BOSE, so how can i get this working?
It sounds like you are getting sound from all 4 speakers, so all you need to do is connect the Bose pin of the RNS-E (pin B7) to ground.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #3 ·
thanks Dave

Cheers Dave,

would that be any ground, even the chassis of the RNS-E?

or is there a specific Ground pin that would be better?

Chris
 

·
Premium Member
Joined
·
11,350 Posts
Pin D12 would be best.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top