Audi Forum banner

RNS-E turns on already in route guidance?

1K views 6 replies 5 participants last post by  PetrolDave 
#1 ·
A friend of mines RNS-E occasionally will start up (at point of ignition) with previous destination in route/guidance. We have tested this out and it's really strange however it is sporadic. The unit will generally display the last route inputted into the system. I figured a ecu reset would do trick but haven't attempted yet. Figured I'd ping the boards. Anyone come across an issue such as this?
 
#3 ·
If you get close to, but in the opinion of the RNS-E don't actually reach, the destination then the route will be still active - and will be displayed when you next turn it on.
 
#7 ·
adrianma said:
mine does it too

i would arrive home and it would say 'destination reached' the night before

in the morning it would tell me to drive 300 feet to arrive at destintion..
Do you get the "Dest Reached!" message on the DIS, or just the voice prompt?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top