[mat2153]

Hi, I currently have only version 0100 software on my unit in my 2004 Audi A3 and have therfore been unable to use the bluetooth module I have had fitted. I have a 2005 Europe DVD and would like to know how to update the unit. Any help would be grately appreciated. Thanks

 

[NSX JR]

edit: failure to read closely

 

[mat2153]

I have the DVD in all the time but the version still remains as 0100 with bluetooth not working

 

[AudiA4B6US]

Euro DVD 2005 includes sw 0100 only. You will need to get a Euro 2005_1 (sw 0330) or 2005_2 DVD (sw 0360) to get the new phone features. Don't just borrow a DVD, your old 2005 DVD won't work anymore after the update. The newest Euro DVDs are 2006 (sw 0450) and 2006_1 (sw 0460).

 

[mat2153]

thanks for the help, will see what i can find on ebay

 

[mat2153]

okay, i'm now using the Europe_1 DVD which has upgraded my software to version 0460. But I still have the message

"When you recieve a call the following options can be selected using the rotary push button: .... etc."

Please let me know what settings need to be programed in the VAG-COM. I have a 2004 UK Audi A3 (8P).

Thanks again

 

[AudiA4B6US]

make sure that your phone interface (#77) has an index letter of C, F, H, M or K. If that's the case recode the phone interface to 1xxxx to tell it that there is a "HIGH" RNS-E connected. Then check the softcoding of the RNS-E (#56) and set 0xxx7xx to make it look for the phone interface. To apply the changes set #56 channel 111 to 1, the RNS-E will then do a cold reboot and the enhanced phone features should be available.

 

[mat2153]

thanks for the help again, I printed this out and some other coding info and got my local audi garage to do the codeing while it was in for a service. Now I have a proper telephone menu with pairing key settings, etc. but I cant seem to get my bluetooth phone to talk to it. How do I pair them up or get them talking? I've tried searching for the module on my phone but nothing found Could there be another problem? Thanks

 

[AudiA4B6US]

What phone? Is there any other device paired when you try to find the Audi UHV? The Audi UHV will only look for a phone the first few minutes after turning on the ignition and the phone must be discoverable by the Audi UHV.

 

[mat2153]

Nokia 6233 and SE K610i. I've just been out again to try it but no luck. It just says "Phone not properly connected" or something. Any ideas?

 

[AudiA4B6US]

Did you have the dealer check if Bluetooth is enabled on the interface (#77 channel 133 = 1) and that the interface allows pairing without cradle (#77 channel 134 = 0)?

 

[mat2153]

I can only assume so. This is the sheet I handed to the technician:

BlueTooth Codeing

Options in BOLD TYPE are the settings required.

My Coding 10322
# 77 (Phone)
Coding - Function 07
HU = Head Unit (i.e. RNS-D/E)
MFL = Multifunction Steeringwheel
?xxxx: type (car)
0 - with CAN-bus (A2, A3, TT)
1 - D3/C6 High-System
2 - C6 Standard-System
x?xxx: type (Steeringwheel)
0 - non multifunction steering wheel
1 - standard steering wheel
2 - modular steering wheel
xx?xx: installed components
1 - none
2 - MFL
3 - HU
4 - MFL and HU
5 - K-line
6 - MFK and K-line
7 - HU and K-line
8 - MFL, HU and K-line
xxx?x: language for voice control
0 - voice control off
1 - German
2 - English (UK)
3 - French
4 - Italian
5 - Spanish
7 - English (US)
8 - Voice control from external device (i.e. RNS-E)
xxxx?: Language for DIS
0 - no DIS display
1 - German
2 - English (UK)
3 - French

#77 Adaptation 10
-> Channel 128 (Base Volume)
000 - 0dB (no increase/decrease)
001 - +1dB increase
003 - +3dB increase
006 - +6dB increase
128 - -1dB decrease
130 - -3dB decrease
133 - -6dB decrease
-> Channel 129 time after ignition off
000 - 30 Sekunden
001 - 5 Minuten
002 - 10 Minuten
240 - 20 Stunden
-> Channel 131 (Microphone Sensitivity)
000 - 0dB (no increase/decrease)
001 - +1dB increase
002 - +2dB increase
003 - +3dB increase
004 - +4dB increase
005 - +5dB increase
006 - +6dB increase
128 - -1dB decrease
129 - -2dB decrease
130 - -3dB decrease
131 - -4dB decrease
132 - -5dB decrease
133 - -6dB decrease
-> Channel 133 ( )
activate/deactivate.
-> Channel 134 (handsfree)
0 - handsfree over
1 - handsfree only with mobile in cradle
-> Channel 135 ( -PassKey)
default: 1234

any ideas?