Audi Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5,817 Posts
Discussion Starter #1
I decided to post few pics for all those with screen connection problem. If your screen goes black, darker or part of it doesn't work, the first thing to check is tape connection. Most of the times loose or faulty tape can cause those problems.

You will need to follow few steps:
  1. set your screen to OPEN position
  2. turn unit OFF
  3. unlock the connector & remove tape
  4. remove 3 screws and remove your screen
  5. remove faceplate to get access to other end of connection tape
  6. double check connection to main board (check if tape locking mechanism works)
  7. put everything back together
If you still have a problem then your tape or screen is faulty.
 

Attachments

·
Registered
Joined
·
19 Posts
rns-e screen

ok - so this is 3 years after your post so hope you get this!

Can I follow your instructions with the head unit still in the dash?

Thanks

Matt.
 
1 - 3 of 3 Posts
Top