Audi Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I'm confused.....RNS E (8EO 035 192 C) into '99 S4 fitted with analogue clock and BOSE music. I realise I need a double din cage and might have to do some fine tuning re fit but are all the required signal available etc etc

Thanks

and, i have one the search but am still confused
 

·
Registered
Joined
·
6,767 Posts
The 8E0 doesn't fit in a B5, before you start cutting the faceplate take a good look at the double DIN cage. And the 99 B5 doesn't have CAN, so even if you get a CAN adapter the DIS will not work anymore (neither radio station nor route guidance).
 

·
Registered
Joined
·
6,767 Posts
If non-starter means "don't start" then yes, it's a non-starter. You will need to get a 4B0 RNS-E, a converter box from discrete signals for lights and ignition to CAN as well as the double DIN conversion.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top