Audi Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
RNS-E Mk2 in A4 Cabrio B6 8H MFSW make & end call buttons not working

I have just purchased a refurbished Mk2 RNS-E for my Audi A4 Cabriolet Sport 2004/5 B6 8H to replace my Mk1 version.
PART NUMBER: 8E0 035 193 A s/w 0700
I have tried to programme it to the same as my Mk1, but some of the Adaption codes appear to be different ?

My main issue is that although it has recognised my BT Phone module, the Make & End Call buttons don’t work anymore ?

Also it does not appear to have voice recognition, but that maybe because these two buttons are not working ?

I would have thought that the Make & End Buttons should work regardless of whether or not it has SDS ?

Should I still be able to voice select saved phone numbers in the BT module with the new MK2 ?

I have not done any coding for 10+ years and had to dig out my old laptop to do it, so please be gentle with me as I am on a steep re-learning curve J

Any help is gratefully received

Here is my current coding for the relevant modules

Address 77: Telephone
Protocol: KWP2000
Part No: 8P0 862 335 H
Component: FSE_255x BT H26 0290
Coding: 0010802
Shop #: WSC 00000

Address 37: Navigation
Protocol: KWP2000
Part No: 8E0 035 193 A
Component: RNS-E PU EU SP H06 0700
Coding: 0309113
Shop #: WSC 13246

Address 17: Instruments
Protocol: KWP2000
Part No: 8H0 920 950 K
Component: KOMBI+WFS 3 H12 0020
Coding: 0000401
Shop #: WSC 00359

Address 16: Steering wheel
Protocol: KW1281
Part No: 8E0 953 549 N
Component: Lenksáulenmodul 0611
Coding: 04111
Shop #: WSC 00000

I have also tried setting the adaption for #37 to the same as my Mk1 as follows

# 37
RNS-E
Recode to
0
4
1
3
7
1
8
Channel
001
002
003
007
008
010
070
099
136
My Value
1964
45
2
3
1
0
?
0
00013

But #08 is set to 255 and I can’t change it to 1 ?

I haven’t tried to change any adaptions other than for #37
 
1 - 1 of 1 Posts
Top