Audi Forum banner

RNS-E Install Guide for A3 (8P)

3K views 5 replies 4 participants last post by  PetrolDave 
Your coding section is wrong, there is no cluster programming for an A3 8P, you need to programme the CAN gateway (module 19) to tell the car it has a nav system installed.

Other than that, a nice write up...
 
That message tells you....

Can gateway (module 19) with VAG use the long coding helper and tick "Navigation", save the new number and reprogramme it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top