Audi Forum banner

1 - 7 of 7 Posts

·
Super Moderator
Joined
·
11,350 Posts
rjgreen4 said:
... need to find the VAG.COM code for the enabling of the mute function...
No VAG-COM code needed, just connect the mute signal from the H/F to the MUTE line on the RNS-E (and if you want the phone audio to use the car speakers connect the phone audio to the LF+ and LF- lines).
 

·
Registered
Joined
·
5 Posts
Hi there all... A newbie here!

I've just installed (well, still trying) a RNS-E in my 2004 Audi A3 from a Symphony II.

All is going well, excpet the phone mute.

I've a bluetooth kit already installed, and depsite connecting the mute wire to the appropriate pin on the Nav Plus, it dosen't work.

I've looked through this site, and come across this:
http://www.navplus.us/forum/viewtopic.php?t=507&start=0&postdays=0&postorder=asc&highlight=telephone+mute
but, I'm not up to speed on what this VAG code is...

Am i missing something?

I'd be grateful for any help.

Thanks

Chris
 

·
Registered
Joined
·
6,767 Posts
The RNS-E must be coded for no phone unless you have the OEM Audi phone kit installed. If you don't have a VAG-COM cable you will need to visit your friendly dealer who can check the config in a few minutes and confirm that it's coded properly.
 

·
Registered
Joined
·
3,759 Posts
Code is 0xxx1xx for no phone connected.

Craig
 

·
Registered
Joined
·
5 Posts
Thanks for that advice...

I'l pop down to my local dealer and see how friendly he is!

I'd don't know anything about VAGing the car myself, is there anywhere you can point me to, or give me a brief idea of what's all about. I take it that code is if I do the work myself?

Thanks

Chris
 

·
Registered
Joined
·
6,767 Posts
The the official Ross Tech pages to see what you can do with VAG-COM. There are also some help pages over there with examples.
 
1 - 7 of 7 Posts
Top