[Icejedy]

Hello on rns-e eu doesn't work.
do you know the right combination to access on the engineer mode on the rns-e eu

 

[PetrolDave]

Try looking 10 threads down Engineering Mode for Audi Navigation+ RNS-E .... tells there how to get into Engineering Mode.

Can you be more specific about what isn't working on your EU RNS-E? Maybe then we can offer some help and/or advice.

 

[Icejedy]

doesn't work

hello thank you for your reply
i have read the thread that explain how to get in the engineer menu but on my rns-e eu it is not possible to enter.
I tried to push nav button after the top left button for 5 second and the top right button for 5 second but nothing is appeared.
Please help me.
Thank you
Lorenzo

 

[PetrolDave]

Re: doesn't work

I tried to push nav button after the top left button for 5 second and the top right button for 5 second but nothing is appeared.

Please read the instructions again carefully.

Turn the RNS-E off and on.

Press the NAV button.

Press the Top Left button for a long time - I usually do it for 10 seconds.

Then do the same with the Top Right button - again for a long time - then Engineering Mode will appear without you pressing any other button.

By Top Left and Top Right we mean the ones just by the large round knob.

This works on my EU RNS-E.

 

[craigyb]

If your RNS-E "isn't working" ie "dead", you will never get it into engineering mode.

 

[Icejedy]

the rns-e is working correctly but the engineer mode is impossible to access.

 

[fritzner]

engineering mode is tricky to get into.. i still cant do it on the 1st try, but unless your buttons are broken it should work..

more importantly, what isnt work??.. explain what you mean by "doesnt work"..

doesnt turn on??
doesnt play music??
doesnt navigate??

 

[Icejedy]

It works correctly

Thank you very much now is working correctly the enginner menu.
Thank you to all