[craigyb]

GALA goes to V-signal

BOSE goes to GND is you have BOSE installed in your car.

Pins are easy to remove, take the blue connector out of the main plug, take the black insert from the blue "B" connector, use a small screwdriver to push the latch pin down and slide the pin out. Make sure the pin latch is up again when inserting the pin.

Craig

 

[craigyb]

If your car has a BOSE sound system installed, then you need that pin 7 to go to GND on the power connector, it tells the system "BOSE" enabled or something like that.

On my adaptor it's just linked to the main GND wire of the RNS-E adaptor.

 

[craigyb]

Have look at the lid of the RNS-E it shows the connector layout.

D: Power Connector
9 - CAN-H
10 - CAN-L
11 - TEL-Mute
12 - Kl.31 (Masse) GND
13 - U14 ST DSP (radio On)
14 - DWA
15 - Kl.30 +12V
16 - U14R-1