[klrgreenis]

Can some tell me whether the GALA wire from the dash that I connected to pin 1 of my factory eight pin connector is supposed to go to pin 7 the BOSE pin on connector B of the RNS or pin 3 The V (GALA) signal on connector B of the RNS. My adapter harness by default has this going to pin 7 which just doesn't seem right. I think that the BOSE pin 7 that it is connected to is for the BOSE autopilot?? :?

How hard are the pins to pull out and move??

My other post describes the problems that I am having. I also did engineering mode or whateve it is called last night, and no speed signal is being displayed. Could this be why my maps aren't working?? :?

 

[klrgreenis]

Thank you Craig,
Can you explain the bose to ground thing more?

So the bose pin # 7 from the RNS goes to ground??

Thanks a million!!

 

[klrgreenis]

Perfect, you don't happen to know what connector and PIN # the ground wire is do you?
I swapped the GALA wire from the BOSE to the # 3 V GALA wire. I can now see mph using the engineering menu, but still no darn map, or routing abilities??? :? :shock:

 

[klrgreenis]

Perfect PIN 12 it is then. I did take a look over luch quick, but I don't think pin 12 said ground.

Thanks a million :lol: