Audi Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
Can someone tell me what the difference is between:
0 = Basic (for RNS-E basic/Radio)
1 = Comfort (for RNS-E high/RNS-Low)
 

·
Registered
Joined
·
6,767 Posts
Where does this come from? A real RNS-E HIGH has SDS, but all RNS-E runnign the Euro 0360/US 0110 software have the HIGH functionality in regards to the telephone interface.
 

·
Premium Member
Joined
·
11,350 Posts
Ponch said:
Can someone tell me what the difference is between:
0 = Basic (for RNS-E basic/Radio)
1 = Comfort (for RNS-E high/RNS-Low)
This is the first digit (of five) when coding the Bluetooth module.

You set it to a 1 to tell the Bluetooth module that there is an RNS-E present and that the extended Bluetooth functionality should be enabled.
 

·
Registered
Joined
·
189 Posts
Discussion Starter · #5 ·
Ahhhh, thanks sir ... I'll check when I get home to see if I set it right.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top