Audi Forum banner
1 - 1 of 1 Posts

9 Posts
Discussion Starter · #1 ·
My RNS-D unit came with a loom that plugged into 26 pin connector on the left of the unit (when viewed from the rear) this had a female 8 pin connector that connected to the male black 8 pin connector from the car, the loom has a male 8 pin connector that plugs into the 8 pin female on the back of the head unit (lower right), this leaves the brown 8 pin connector (speakers) to plug into the head unit (but doesn't do the rear speakers (( see other thread)) )
The looms black 8 pin connector doesn't have a pin for the GALA pin, can this take a feed from pin 5 of the 26 pin connector? or does it need a 12v feed from somewhere else?

This is all on a 1996 S6 Avant.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.