I having a problem coding Radio / Navigation Module to enable Bluetooth...I cannot select option 5 -Telematic Europe. I have a an RNS-E and have retrofitted a BT module and microphone only.
Any help would be appreciated, I have been able to code Module 77 ok.
Hi all ,
Just replace my old Concert 2 (1din) to new Concert 3 (2din) on my A3 8p.
But I have a problem with antenna reception.
I have check VAG COM for see the problem
Address 56: Radio Labels: 8J0-035-1xx-56.lbl
Part No SW: 8P0 035 186 G HW: 8P0 035 186 G
Looks like the guys over at Audi4ever.at have found a way to convert the phase diversity system used for the Concert/Symphony II+ to switching diversity required for the RNS-E. They used a diversity box from a Golf V which only needs power and which is small enough to be stuck somewhere under...
I am trying to retrofit electric latch locking on my 2010 a3 cabriole. Does any one know were main wires are running through within the roof canvas? The idea is too find the easiest way to run two wires form the roof controller to the top of the latch motor lock on the canvas roof top...
I installed RNS-E into my 2002 allroad few months ago, recently I was browsing through the "engineering mode" and decided to test the reverse signal. Although my wire is connected according to TeddyBGame's and Lee Hick's directions, it seems like the unit is not seeing the reverse command...