Audi Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
First off all very usefull forum.



Guys this a very cool forum i have been reading a lot of posts. But as you can guess i also have a question.

In my a6 is a grundig radio installed single din. And i was wondering since this not an oem audi radio wil i have all the connections that i need to install the rnse? (Does anyone know if the cables are standard installed in the a6 no matter what radio you have in it.

Gr ycoty (netherlands)
 

·
Registered
Joined
·
6,767 Posts
If the car was originally built without any OEM radio then you will find only 12V permanent, ground, light and possibly speaker wires behind the head unit. But you can always get the CAN signal from the cluster just like those pre-2002 do when they retrofit the RNS-E. Remember that the RNS-E has only a two channel speaker out. If you currently have a 4 channel speaker setup you will need an extra amp to drive the rear speakers.
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #3 ·
Hi,

At this moment i have 4 speakers in the car. When i dim the cluster light th e radio also dims does this info helps ?

Gr ycoty

thnx for the quick reply
 
1 - 3 of 3 Posts
Top