Audi Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
595 Posts
Discussion Starter #1
I have just finished the retrofit of Hands Free Trunk Release in my Q7.
I have used a custom build module to interface the system with my 2008 Audi Q7. This module, powers the bumper sensors and sends GND when sensor is activated to the same circuit as the trunk handle switch.

The module is compatible with any car regardless of manufacturer. I have tested it on Audi, VW (Toaureg) and BMW X6. The only conditions for this feature to work is to have power tailgate and keyless-go (comfort access for BMW).

Installation is very easy but require to take the bumper out. There is no coding required.

Here is the official presentation video from Audi.

 

·
Registered
Joined
·
39 Posts
hi, Neo
I very interested to do this if you can tell me about module where i can get
thanks
one question i need coding for ABS My Q7 is 3.6 fsi 2007 old coding 0037905.
i install ACC can you help me
Thanks
 
1 - 2 of 2 Posts
Top