Audi Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
737 Posts
Discussion Starter · #1 ·
Where are you guys getting power for you BT module?

I have had mine connected at pin #D-16. I've spoke with Lanny and he's adding a pigtail for the power wire and we are unsure of which pin to put it at? He's saying that it should be at pin #B-10.

If pin #D-16 is not correct then this may be why I've been having a battery drain?
 

·
Registered
Joined
·
1,624 Posts
D16 is fine. I've connected dozens like this. It will not drain your battery as long as the BT module is receiving correct CANbus signals (which will allow it to power itself down after you remove the key).

B10 is switched power and is not the correct way to power the BT module. ALL devices that are connected to the CANbus should be provided with a constant power source. This is how they are designed to work.
 
1 - 2 of 2 Posts
Top