Audi Forum banner
1 - 20 of 20 Posts

· Registered
Joined
·
95 Posts
Discussion Starter · #3 ·
tonights the night - going to have new US nav dvd when i get home from work - fedex says its on the truck for delivery.

funny thing it went from san jose, CA to san francisco, CA to memphis, TN all the way back to oakland, CA then menlo park, CA then out for delviery.

menlo park is about 20 miles from san jose and directly on the way to san francisco. :shock:

--------------------------------------------------------
Thank you for contacting NAVTEQ.

The product being shipped is Version 2006.1 released November 2005

Item Status.............: Shipped
Shipment Date...........: 11/11/2005
Delivery Date.............: 11/14/2005
 

· Registered
Joined
·
95 Posts
Discussion Starter · #8 ·
so it is version 2A and just read disk and shows different map version ends in 409...no update or anything.

should i do anything to start update i was under the impression you just inserted the disk and it ran? i was going to restart but wanted to ask first sometimes i get a pain with entering the pin.

anyways if it is just map update what to do?---

PROXUS, others

can i use SAT radio and how is AM handled in newest EU firmware also am i stuck hacking this dvd for maps?

OR

is it better to just leave existing version of X--- or update to newest available US firmware?

i have H44 "4B0 P" unit, EU updated with US firmware version X---
 

· Registered
Joined
·
1,499 Posts
brianjpugh said:
so it is version 2A and just read disk and shows different map version ends in 409...no update or anything.

should i do anything to start update i was under the impression you just inserted the disk and it ran? i was going to restart but wanted to ask first sometimes i get a pain with entering the pin.

anyways if it is just map update what to do?---

PROXUS, others

can i use SAT radio and how is AM handled in newest EU firmware also am i stuck hacking this dvd for maps?

OR

is it better to just leave existing version of X--- or update to newest available US firmware?

i have H44 "4B0 P" unit, EU updated with US firmware version X---
from what I read you are not going to trigger update in your navigation because it's converted EU so mostlikely index ID is higher than any US software.

I have original US unit with 0040 software so I will check if DVD with trigger any updates. If we will know that updates exist on disk then we will try to build update disk for EU units. Theoriticaly it should be possible but who knows 8-[
 

· Registered
Joined
·
155 Posts
PROXUS said:
brianjpugh said:
so it is version 2A and just read disk and shows different map version ends in 409...no update or anything.

should i do anything to start update i was under the impression you just inserted the disk and it ran? i was going to restart but wanted to ask first sometimes i get a pain with entering the pin.

anyways if it is just map update what to do?---

PROXUS, others

can i use SAT radio and how is AM handled in newest EU firmware also am i stuck hacking this dvd for maps?

OR

is it better to just leave existing version of X--- or update to newest available US firmware?

i have H44 "4B0 P" unit, EU updated with US firmware version X---
from what I read you are not going to trigger update in your navigation because it's converted EU so mostlikely index ID is higher than any US software.

I have original US unit with 0040 software so I will check if DVD with trigger any updates. If we will know that updates exist on disk then we will try to build update disk for EU units. Theoriticaly it should be possible but who knows 8-[
OH! The anticipation... :shock:
 

· Registered
Joined
·
95 Posts
Discussion Starter · #12 ·
PROXUS

right forgot the index due to original US firmware update which tricks system into thinking its euro update

so after comparing things do you have euro 360 dvd can you look in INDEX.TXT file and get the following values these are from update cd post on AW and imply euro verison 330

SOFIDX:0330
NAVVER:V220059E
AUDVER:A2210126

...assuming increasing the index to at least 330+ to make update to US take place then yes theoretically i should be able to again make index higher to get new US if it turns out to exist on your 040 US unit.

after looking at US 2a dvd i see the following

SOFIDX:0110
NAVVER:V222023F
AUDVER:A2220132

looking at my US 1a dvd i see

SOFIDX:0020
NAVVER:V222017B
AUDVER:A2220109


-----------------------

MY IDEA

to create update for already converted EU unit would simply require looking at 360 files and taking same pieces used previously to make an update cd what do you think?

anyways i await your findings.

thanks.
 

· Registered
Joined
·
481 Posts
not sure if i read your email correctly.. the 2006 US DVD does not update your EU->US RNS-E, correct??.. sorry to hear that.. does it work at all??..

hopefully we can figure something out..

anxious to hear what (if any) updates it does on a 'real' US RNS-E..
 

· Registered
Joined
·
6,655 Posts
Stoodo said:
Call me optimistic, but a Soft ID of 0110 sounds much better than the speculated 044 etc.

:)
I agree with that. The Audio version is at A2220132 which is one point higher than the Euro 0360 (A2210131). Not sure yet what software component is part of the Audio sw and what is part of the Navi sw but it looks promising. Let's keep the fingers crossed that we will get at least some of the features Europe got already.
 

· Registered
Joined
·
95 Posts
Discussion Starter · #16 ·
AudiA4B6US - sounds like you can help me or please anyone else

do you have euro 360 sw? if so can you get send me the the files needed to do an update cd or just the info needed for each?

- 00.VNS
- A2220109.MOT
- INDEX.TXT
- LDM.BIN
- LOADING.KWI

need the following values from 360 dvd

INDEX.TXT:
SOFIDX:0330
NAVVER:V220059E
AUDVER:A2210126

00.VNS:
V22000 059E

LDM.BIN:
V220045A

LOADING.KWI:
V220
045A
LDR V220045A
APL V220057B
FNT V220055A
OS V220059D


ALSO
on audio sw that is recognized by rnse via dvd right i do not update the file itself correct?
 

· Registered
Joined
·
6,655 Posts
Index.txt:
SOFIDX:0360
NAVVER:V220059J
AUDVER:A2210131

00.VNS:
V22000 059J

LDM.BIN:
V220059J

LOADING.KWI:
V220
059J
LDR V220059J
APL V220057B
FNT V220055A
OS V220059H

The mot file is A2210131.MOT, naming it right should start the update but may not work if the unit is already on audio sw A2210131.
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top