Audi Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter · #1 ·
Hello,
I just finished installing an RNS-E for Audi A4. I've run into two problems. The radio doesn't work and I can't get the mute symbol to go away. Any help would be greatly appreciated. Thanks
 

·
Registered
Joined
·
149 Posts
Check your 8pin power connector on the wiring harness..
seems your mute cable is causing this (common) problem.

Just cut the cable and your problem is solved.
 

·
Registered
Joined
·
6,767 Posts
Check pin D11 and make sure it's not connected to ground.
 

·
Registered
Joined
·
81 Posts
Discussion Starter · #4 ·
that did it.

powertony said:
Check your 8pin power connector on the wiring harness..
seems your mute cable is causing this (common) problem.

Just cut the cable and your problem is solved.
I cut the cable and that fixed the problem. Thanks for your bit of expertise. Thanks both of you guys for the feedback.
 

·
Premium Member
Joined
·
11,350 Posts
AndersonS4A said:
Can someone please tell me how I am to tell which cable is the D11 one?
Look at the label on th top of the RNS-E, there is a picture and information on the pin numbering.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top