Audi Forum banner

line out on RNS-E?

1306 Views 3 Replies 3 Participants Last post by  mchang
Thinking of putting RNS-E in my B5 S4 (US). Line out on my Symphony is accomplished with the Blaupunkt adapter. Any thoughts on this working on the RNS-E? The connectors look the same...
1 - 1 of 4 Posts
theoretically, it should work the same. You'd retain your blau line out connector....but you'd need the plug/play harness from Kufaka (sp).....required for any RNS-E install.

Also, just make sure the RNS-E is configured for Bose (no passive speakers...I think)...and you should be all set.

Make sense? Thoughts?
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.