Audi Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Hi all.

Thanks for great forum. Lots of help to my installation.

Ihave just installed RNS-E in my 1999 A6, and it seems to work fine. But the light switch on and off... Even when the unit is turnd off and the car is locked.
About 1 to 2 minutes with no lights then it blinks and then 1 to 2 minutes again. It is like tis all the time, even while motor is running.

Any one know what the problem is?

The car isn't WAG'd yet.

/esp1
 

·
Registered
Joined
·
6,767 Posts
Where did you get CAN from? A 1999 A6 is not supposed to have, is it?
 

·
Registered
Joined
·
6,767 Posts
Check the wires and make sure that none of them is lose. You can also check with a VAG-COM if there are any faults logged concerning CAN. If none of this is the case contact Kufatec, it may be that their CAN adapter doesn't provide the messages the RNS-E expects fast enough.
 
1 - 4 of 4 Posts
Top