Audi Forum banner
1 - 2 of 5 Posts

· Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
1. the unit resets itself from time to time. it freezes and restarts from time to time.
2. statics coming out of the speakers, while the unit is on and recognizes radio stations
3. after maybe 3 manual turning on and off, a screen full of japanese characters came on and won't shut down (manually and automatically like I mentioned above). I can read Chinese, and as you know Japanese uses some Chinese characters, so the unit is mentioning something like:- check the CD ROM (or something of that nature).

All of the wires were in place as I was following all of the instructions you can find on this forum. I made sure like 3 times.

I put the dvd in it and it gets worse. It wont eject it and freezes everytime i turn it on.

Could it be because it has NOT been vag-com'ed?

Maybe I am not giving enough info for you guys to diagnose the problem. Please point me in the right direction.

I need some help. Any help would be much appreciated.

I will be checking this post every 5 minutes.

TIA...
 

· Registered
Joined
·
38 Posts
Discussion Starter · #3 ·
RE:

ok... i tried that but still the same...

i found out that the fader was all the way to the front... i moved the fader to the middle and ONLY rear speakers have audio out and the front speakers are still having staticy noise...

i removed the DVD and the SD cards and it does not freeze anymore...

but i would like to get both into their slots and have it not freeze up...

is it because of the firmware? it is an E unit...

would vag-com it solve the problem?
 
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top