I got these error codes with the VAG?

1366 Views 4 Replies 2 Participants Last post by todd1010, Oct 4, 2005

todd1010

Discussion Starter · Oct 3, 2005

VAG-COM Version: Release 504.1-UD

Control Module Part Number: 4B0 035 192 P
Component and/or Version: RNS-E US H52 X---
Software Coding: 0509313
Work Shop Code: WSC 15875
1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -

VAG-COM Version: Release 504.1-UD

Control Module Part Number: 8D0 920 980 DX
Component and/or Version: B5-KOMBIINSTR. VDO D12
Software Coding: 02264
Work Shop Code: WSC 02120
1 Fault Found:
01304 - Radio
49-10 - No Communications - Intermitt

Does anyone know what they can be? I think I know what the 2nd one is from. I had the RNS-E unplugged while I changed some things around. But the 1st one is unfamilar as to cause.

See less See more

Save

1 - 5 of 5 Posts

PetrolDave

· #2 · Oct 3, 2005

todd1010 said:
Control Module Part Number: 4B0 035 192 P
Component and/or Version: RNS-E US H52 X---
Software Coding: 0509313
Work Shop Code: WSC 15875
1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -

509313 coding means:

5 = A6
0 = front speaker fault tracing ON
9 = Bose
3 = Cullmann phone fitted
1 = no SAT radio
3 = CD changer

So the incorrect coding could be for the following reasons:

1) you don't have a Cullmann phone system in your car
2) you don't have a correctly wired up CD changer in your car

See less See more

Save

todd1010

Discussion Starter · #3 · Oct 3, 2005

what would I need it set at?

I have the A6 RNS-E in my B5 S4 with OEM Sirius Tuner & Phatbox with a custom made wiring harness. Would the head unit have lost its memory if it had been uplugged for about an hour?

Save

PetrolDave

· #4 · Oct 4, 2005

todd1010 said:
what would I need it set at?

I have the A6 RNS-E in my B5 S4 with OEM Sirius Tuner & Phatbox with a custom made wiring harness. Would the head unit have lost its memory if it had been uplugged for about an hour?

I would try 501133

5 = A6 - for separate speed signal to work
0 = Front speaker diagnostics active
1 = A4 sound characteristic - unless you have Bose when this should be 9
1 = no telephone - unless you have a telephone
3 = satellite radio
3 = CD changer - in your case Phatbox

The coding should be stored in non-volatile memory.

Save

todd1010

Discussion Starter · #5 · Oct 4, 2005

I tried changing it to: 0509333

Once I put in the recode, it would't store it and would go back to 0509313

My satellite radion works fine with this code, so I don't know what it could be?

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month