Audi Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi,

Firstly this is my first post so waaahaaaayyyy :p

Secondly a friend of mine has a RNS-E unit (Model 8E0 035 192 D) which he is selling. Before I buy the unit I just want to make sure its not dead so I would like to know if there is anyway I could test this by wiring it to a 12v supply?

He has the CD, code etc but I dont have the car to fit it into until October, is there anyway to do this? Any help or advice would be much appreciated.

Thanks in advance,

JJ
 

·
Registered
Joined
·
6,767 Posts
Just connect pin D15 to 12V+ and D12 to ground and you should be able to turn on the RNS-E and enter the safe code. A 5A PSU or computer PSU should work.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Thanks very much, can I find a diagram anywhere showing the pin numbers or are there references on the case? New to all this sorry?

Thank you for your reply :) Much appreciated.

Regards,

JJ
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top