Audi Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
I don't know the english term, but if my car has levercontrol (?) from factory, how do i see that?
If i have it, can i lower it?
If so, how do i do?
If not, can i mount coilovers without too much effort?

Look forward to advice!

/Jim
 

·
Registered
Joined
·
53 Posts
Could be level control. More likely self-levelling suspension at the rear, which is hydraulic and pressurised using the power steering pump. You'll see some pipes going into the rear shocks.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #3 ·
Could be level control. More likely self-levelling suspension at the rear, which is hydraulic and pressurised using the power steering pump. You'll see some pipes going into the rear shocks.
Thanks for your reply!
Do i see those from inside the.. Fenders, or do i have to dissamble and look from inside of the trunk?
Will it still be springs? Cause i have springs..

Thanks

Jim
 

·
Registered
Joined
·
53 Posts
It's still springs, just the shocks have pressure adjusters in them.. If there are pipes going into the shocks, then it's the self-levelling suspension for the rear.
 
1 - 4 of 4 Posts
Top