Audi Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
Hi

I have the RNS-E all up and working but unsure of one cable

On my symphony II Headunit there was a cable like the diversiry antenna connector on the RNS-E system. Its brown/yellow in colour.

What is it please?

I dont see any where to plug this cable back into the RNS-E head unit

Many Thanks

EDIT....Right I see its called a CURRY connector...if that helps

Thanks
 

·
Registered
Joined
·
6,767 Posts
If you get the antenna adaptor for the RNS-E, you get a dual factor plug with an empty slot. You remove the curry housing from the diversity antenna and insert the metal plug into the dual housing of the antenna adapter. There are some pictures in this topic that shows how to move the diversity antenna over: http://www.navplus.us/forum/viewtopic.php?t=70

The diversity antenna is needed to do the automatic antenna switching for better reception.
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #3 ·
AudiA4B6US said:
If you get the antenna adaptor for the RNS-E, you get a dual factor plug with an empty slot. You remove the curry housing from the diversity antenna and insert the metal plug into the dual housing of the antenna adapter. There are some pictures in this topic that shows how to move the diversity antenna over: http://www.navplus.us/forum/viewtopic.php?t=70

The diversity antenna is needed to do the automatic antenna switching for better reception.
Once again thanks
 
1 - 3 of 3 Posts
Top