hello!!!i would like to ask something?i have an s3 modell 2003 with can bus!!!i recently installed a navi plus!!!i connected the speed signal cable in the 31 pin behind the instrument cluster!i programmed my navi with vag com to use the gala signal.is this right?i heard that other s3 use the abs signal!!! :idea:
gala or abs???please help!!!
1 - 6 of 6 Posts
Joined
·
11,350 Posts
My S3 used gala on the Symphony II radio.s3225hp said:
OK!!!i read what you wrote in the forum about gala signal!!!can i ask you something more?can you tell me why when i have the navigation mode in my fis display above the navi information i see the track number and temperature when in other factory fitted navis in the s3 the can see the cd number and the track number?have i made any mistake? 
Joined
·
11,350 Posts
I don't know of any way to change what the DIS shows by coding or adaptation. Not 100% sure but I think it might be related to either the type of Navi system or the SW version in the DIS (i.e. vehicle build date).s3225hp said:can you tell me why when i have the navigation mode in my fis display above the navi information i see the track number and temperature when in other factory fitted navis in the s3 the can see the cd number and the track number?have i made any mistake?
My first S4 (May 2003) had a factory RNS-D and showed CD number & track on the top line plus something else that I can't remember on the second line of the DIS, my current S4 (October 2004) has the RNS-E and shows track info (from the MP3 card) on the top line and temperature on the second line of the DIS - both when navigation is active (the display is different when navigation is not active). Both were/are the colour DIS.
I guess the only way to be sure is to attach a CAN bus analyser (does such a beast exist?) and see what the RNS is sending to the DIS.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Code issue on navi + system
CD Navigation Plusbrought a navi + (RNS-D) system off ebay. When i pugged it in and entered the code it came up with a messege in german. It translates as 'CODE NOT ATTACHED'. Can anyone shed any light on this. Is it knackared or am i missing somthing? Its the origional manual with code card still attached. All...- 15
- 10K
-
RNS-D Firmware Upgrade Loop
CD Navigation PlusI am retrofitting an RNS-D from an 03 A6 into another 03 A6. I downloaded the 2003 RNSD firmware update, put it on a CD and started the update. I now find myself in a firmware update loop. I don't receive a "completed" message. The firmware came from here...- 0
- 9K
-
rns-d convert to us spec
CD Navigation PlusI have an rnsd that will not inlock.using the safe code the dealer gave me. Im thinking this is due to the fact that this is a euro model and i need to flash the software/ firmware . Someone on audizine referred me here and said you guys know everything about rnsd/rnse. I hope someone here can...- 9
- 2K
-
Christopher Simpson · updated
-
Problem reading CD
CD Navigation PlusHaving problems loading CD on Navi Plus RNS-D Model 2003, error reading cannot read CD, someone suggested cleaning something inside the Navi, can anyone help with this, also radio etc does not work, no sound or connection to any Radio Stations, i am a newbe to audis, bear with me- 0
- 2K
-
RNS-D Install Help...
CD Navigation PlusHey guys Well I have been looking all over the continent for a B5 A4 specific RNS-D unit and as you might know they are as rare as it gets. I have spent hours of research and have thrown up 3 or 4 threads in the B5 section trying to get and as much info as I can. I just got my hands on one...- 12
- 6K
-
witwer4444 · updated
Join now to ask and comment!