Audi Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
i'm unable to code my instrument and getting the following code, can anyone help?

Address 17: Instruments
Coding 03200
Shop # WSC08091
1 Fault Found
01302-Control module for telematic (J499)
49-00 No communication

I have 2003 B6 with Bose system and steering controls. Thanks
 

·
Registered
Joined
·
6,767 Posts
What is the value in channel 62? And what was the value before you made any change?

If you don't have OnStar installed (e.g. if you replaced OnStar with the BT interface) you have to substract 8 from the current value in channel 62.
 

·
Registered
Joined
·
6,767 Posts
21 was already 16+1+4 (cluster+radio+navi enabled). By adding 4 you disabled navi (-4) and enabled telematics (+8), which is probably not installed and therefore causing an error. Set the old value of 21 (or 23 if you have the OEM phone interface), clear the faults and you should be fine.
 
1 - 5 of 5 Posts
Top