Audi Forum banner

Dietz Multi Video Out Adapter

1277 Views 5 Replies 3 Participants Last post by  chasdrury
Hi guys

Got my Dietz 1417 installed and working lovely, trying to put my 4 way video splitter in for rear TV's now. Slight problem. The 4 way splitter needs power, if i splice it onto the power the 1417 uses it stays on all the time (since it doesnt have CANbus +ve and -ve like the 1417). There is no switched live in the stereo harnesses, do i have to get one out of the glovebox or is there another way I am missing here, without putting a switch on it?


1 - 2 of 6 Posts
Connector D pin 13 is switched 12V+ on the RNS-E.
There should be a label or diagram on your unit, similar to this one:
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.