Audi Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
106 Posts
Discussion Starter · #1 ·
Hi, I have done a bit of searching but to no avail.

How do you use the CD changer harness(Glovebox one) with the plug and play adapter. I have the RNS-E installed in my B7 A4 and wish to add the changer to it. Do you have to put the pins into connector 1 on the car loom so they match up with the PnP adapter? Or is there an easier way to do this?

I have not ordered the harness yet as I am not sure what I am doing!!

Thanks

Terry
 

·
Premium Member
Joined
·
11,350 Posts
terrymcg said:
Do you have to put the pins into connector 1 on the car loom so they match up with the PnP adapter?
That's what I did when I added a CD changer to my previous S4.
 

·
Registered
Joined
·
1,624 Posts
Remember when you do this that if you have sat radio you must run the audio wires from the CD changer harness to the sat tuner in the trunk. This is just like wiring up an ipod adapter.
 

·
Registered
Joined
·
106 Posts
Discussion Starter · #4 ·
NSX,

Thanks, but I am in UK. So hoping it will be easy. I have had a look at your pin out post for the changer. What is th B+ cable on it?
 

·
Registered
Joined
·
1,624 Posts
terrymcg said:
NSX,

Thanks, but I am in UK. So hoping it will be easy. I have had a look at your pin out post for the changer. What is th B+ cable on it?
Constant battery positive (terminal 30)
 
1 - 5 of 5 Posts
Top