Audi Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hi,

Is there a way to add the current GPS location to the memory?

For example, if I'm in the office and want to add it as an item to recall in the future, is there any way to do that? All I've found is the ability to add a destination you've entered in full.
 

·
Registered
Joined
·
51 Posts
I'm not completely sure I understand your question.
But under "NAME" you can create i.e. an entry “Office†under which, amongst other entries, you can enter the location.
You can then recall “Office†in the “NAV†screen from memory (hit "memory" knob and then select "Load from Directory").
But this is explained very nicely in the manual.
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Hi,

I don't think I described it well.

Say, for example, I'm parked in the office car park. Is there a way to save the current location for later recall *without* knowing where exactly where you are and what road? - I don't want to enter all the details for my current location, just add the 'current GPS position' to memory for later recall.

Thanks.
 

·
Registered
Joined
·
4 Posts
I'm guessing you could use the "cross hairs". The map will show your current position. It should be possible to input the lat/long by lining up the cross hairs, entering the position, naming it and storing it to directory. Check the manual for the exact procedure.
 

·
Registered
Joined
·
51 Posts
NAME (directory)
– Press the function button  page 16.
– Select an existing entry  page 101 or create a new entry
 page 100.
– Select as required Category private or business
 page 103, fig.109.
– Select Navigation destination  page 103, fig.11 0.
– Enter the data for the navigation destination, or
– Select Copy from current position or Get from previous
dest. to import the destination data from one of the
previous navigation destinations.
– Select as required Display as top destination to display
the navigation destination in a destination entry menu
 page 133.
You can store two navigation destinations for one directory entry,
one destination for the business category and one destination for
the personal category.
If the Display as top destination function shows a check mark 
after it, this function is active. These navigation destinations are
shown in the main navigation menu  page 133 under the menu
item Start route guidance.
When you have entered the navigation destination and you press
the button, you are returned to the directory card and can
enter additional data if you wish.
Through the directory (Name), you can call up all entries, without
and with stored navigation destination. You can open the directory
entries with navigation destination in the navigation menu via the
control button with the Memory function and by selecting the Load
from directory  page 136 function.
Tips
If you have not inserted a navigation DVD into the Navigation DVD
drive  page 35, you cannot use the Navigation and Directory
functions.
NAME
RETURN
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top