[lt8x7]

I am installing a Bluetooth module in a car with the Bose system fitted. I have already fitted an RNS-E.
My question is:
Since there is already a microphone installed for the Bose system (used for Dynamic Noise Control), do I use this same microphone for the Bluetooth module?
Do I need to connect the Bluetooth module in parallel (splice to the existing wires) to the microphone?

TIA

 

[AudiA4B6US]

No, you need a new microphone. Different specs and different location.

 

[lt8x7]

The Bose microphone is in the centre light in the same place as where the phone microphone goes.

 

[craigyb]

There are usually 2 slots in the light dome for BOSE mic and telephone mic.

 

[PetrolDave]

The Bose microphone is in the centre light in the same place as where the phone microphone goes.

Both are in the centre light - but in different places in the centre light!