Audi Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
819 Posts
Discussion Starter · #1 ·
I what to be able to code RNS-E and bluetooth units without them being fitted to my car is this possible?
 

·
Registered
Joined
·
3,759 Posts
Yep, I do it all the time. I use a can gateway for phone modules
 

·
Registered
Joined
·
3,759 Posts
I don't think anyone has been successful at bench testing phone modules over K-line, I certainly couldn't do it.

Maybe it works now with VAG COM 507.3

I still use my trusty A3 can gateway setup.
 

·
Registered
Joined
·
6,767 Posts
No problems here, just power, ground and K line connected to the RNS-E and an OBD connector and VAG-COM works just fine. IIRC for the BT module I had to connect my cluster, but that was nearly 2 years ago.
 

·
Registered
Joined
·
819 Posts
Discussion Starter · #6 ·
Has anyone got the pinout for the VAS port? I've checked through elsawin and cannot find info
 

·
Registered
Joined
·
300 Posts
Any status on you know what :)

Thanks,

Steve

AudiA4B6US said:
No problems here, just power, ground and K line connected to the RNS-E and an OBD connector and VAG-COM works just fine. IIRC for the BT module I had to connect my cluster, but that was nearly 2 years ago.
 
1 - 9 of 9 Posts
Top