Audi Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter · #1 ·
Be sure to get the latest VCDS (ver 805 or newer) and original RossTech cable.

Removing Seatbelt Chime

[Select]
[17 - Instruments]
[Coding - 07]
[Long Coding Helper]
Click on each of the Byte numbers in step 3) and you'll see the selectable options below.
Uncheck the box for "Seatbelt Warning active"
[Do It!]

Enabling Gauge Test/Needle Sweep
This will sweep the gauge needles through their full range automatically when you start the engine.

[Select]
[17 - Instruments]
[Coding - 07]
[Long Coding Helper]
Click on each of the Byte numbers in step 3) and you'll see the selectable options below.
Check the box for "Gauge Test/Needle Sweep active"
[Do It!]

Enabling Lap Timer

[Select]
[17 - Instruments]
[Coding - 07]
[Long Coding Helper]
Click on each of the Byte numbers in step 3) and you'll see the selectable options below.
Check the box for "Lap Timer active"
[Do It!]

Operating Windows and Sunroof with Remote
(Note, the sunroof cannot be opened with the remote)
You need to continuously hold the remote button for the function to operate.

[Select]
[46 - Cent. Conv.]
[Coding - 07]
[Long Coding Helper]
Click on each of the Byte numbers in line 3) and you'll see the selectable options below.
Check the box for "Comfort Operation: Remote Control active"
[Transfer Coding]
[Do It!]
 

·
Premium Member
Joined
·
11,350 Posts

·
Registered
Joined
·
8 Posts
Does anyone know how to activate ADS button on A4 B8 with MMI Basic Plus? I have tried with what I can find on the internet but still no difference and the LED’s from the buttons are always on.
 
1 - 5 of 5 Posts
Top