Audi Forum banner

B5 retrofit issues - CAN connections, antenna issues, etc.

1578 Views 6 Replies 4 Participants Last post by  himnbandit
first of all, im getting no antenna reception - it looks like the dude sent me the wrong adapter. What he sent me was a single wire that supposedly connects the antenna lead to the outermost antenna connector of the RNS-E unit. From everything i've seen here, thats the wrong thing.

second, apparently the damned thing isnt getting a CAN signal, even though my original symphony unit was wired for CAN high and CAN low, and my harness carries these connections to the RNS-E on connector D, pins 9 and 10. The original symphony unit harness had wires connected to CAN L and CAN H on the diagram below.

third, the VAG settings for the instrument cluster display dont seem to be working out too well for me. I went into controller 17, adaptation, and set channel 62 to 5, it was originally zero. Still no display.

I'm gonna see what i can do about getting another adapter and go from there, any ideas in the meantime? Thanks!![/img]
See less See more
1 - 1 of 7 Posts
I like this "how to" for B5 installs:

I just installed mine last week and it works perfectly.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.