Aux Video interface for Nav+ | Audi Forum

1 - 2 of 2 Posts

TeddyBGame

·

Registered

Joined Mar 15, 2005

·

996 Posts

Discussion Starter • #1 • Mar 16, 2005

found this on the AutoToys website. No pix...but appears to be similar to a Nexxtel or Connext video interface for $195.

http://www.autotoys.com/x/cust/product.php?productid=5175&cat=1015&page=1

KUFATEC GmbH

·

Registered

Joined Mar 9, 2005

·

13 Posts

#2 • Mar 18, 2005

In 2-3 Month we have the Video Adapter too.

The price is very OK...

1 - 2 of 2 Posts

Join the discussion

Recommended Reading

Converting Symphony II+ antenna system for use with RNS-E

Cables / Adapters / Antennas

Looks like the guys over at Audi4ever.at have found a way to convert the phase diversity system used for the Concert/Symphony II+ to switching diversity required for the RNS-E. They used a diversity box from a Golf V which only needs power and which is small enough to be stuck somewhere under...
- 234
- 120K
- AudiA4B6US · updated 15 days ago
cabrio roof top wiring

Cables / Adapters / Antennas

I am trying to retrofit electric latch locking on my 2010 a3 cabriole. Does any one know were main wires are running through within the roof canvas? The idea is too find the easiest way to run two wires form the roof controller to the top of the latch motor lock on the canvas roof top... thx ARI
- 0
- 1K
- danikas · updated May 14, 2014
REVERSE CAMERA PIN OUT?

Cables / Adapters / Antennas

Hello all does any one know the pin out configuration of the 6 pin reverse camera from the R8 4l0980551? ARI
- 0
- 867
- danikas · updated May 13, 2014
Does MK-II RNS-E uses the same reverse signal/location?

Cables / Adapters / Antennas

I installed RNS-E into my 2002 allroad few months ago, recently I was browsing through the "engineering mode" and decided to test the reverse signal. Although my wire is connected according to TeddyBGame's and Lee Hick's directions, it seems like the unit is not seeing the reverse command...
- 4
- 2K
- P
  pokrovsky · updated Apr 11, 2014
Audi A1 RMC2 AU210 Connect Plus NAV, Multimedia

Cables / Adapters / Antennas

Please may I request a little help, I have an Audi Multimedia Unit from an Audi A1. I am trying to 'bench test' it and when I power it up, all I get the Audi logo on showing on the screen, but then it shuts off. What do I have to do to get it to run constantly/properly, which other wires need...
- 6
- 3K
- Code Breaker · updated Jan 22, 2014

Join now to ask and comment!

Top