Audi Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
Hello!


I have 2012 Audi Q7 and I need replace the battery.
I have VCDS Hex-Net cable.
With VCDS I see coding via CAN-gateway and CAN-protocol...
My old battery is 4F0915105E JCB 1B66006

My new battery is Exide EK1050,with code 4L0915105 (000915105CF) without BEM code

What code exactly I must write with VCDS ?
 

·
Registered
Joined
·
4 Posts
Hello!


I have 2012 Audi Q7 and I need replace the battery.
I have VCDS Hex-Net cable.
With VCDS I see coding via CAN-gateway and CAN-protocol...
My old battery is 4F0915105E JCB 1B66006

My new battery is Exide EK1050,with code 4L0915105 (000915105CF) without BEM code

What code exactly I must write with VCDS ?
Honestly, I don't think it matters. You can just leave it the way it is. I have a 2005 A6 (that is now my spare car, I replaced it with a 2015 A6 Prestige) and the first time I replaced the battery with a VW/Audi Genuine Battery it wanted the model and serial number off the sticker. But the second time the battery didn't even have a serial number on the sticker so I didn't change the coding. The car was just fine.
 
1 - 2 of 2 Posts
Top