Audi Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi,
i need urgent help here, where do i locate these cables listed..
speedsignal, parking brake signal and reverse..

the speedsignal i belive i've found by reading Avantéix guide in the f.a.q.. but how can i be sure.

thanks in advance.
 

·
Registered
Joined
·
15 Posts
When you are retrofit RNS-E in your audi, you don't need reverse wire etc
Reverse, speed etc works via CAN signals in a B6
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #5 ·
j0hnny said:
When you are retrofit RNS-E in your audi, you don't need reverse wire etc
Reverse, speed etc works via CAN signals in a B6
acctually i'm not installing the RNS-E, im installing Kenwood KVT-627 with Kenwood navi unit.
i only have parking brake signal left to find.
 

·
Registered
Joined
·
6,767 Posts
The parking brake signal is only used to prevent video in motion. If your unit doesn't have video, just connect it to ground.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #7 ·
AudiA4B6US said:
The parking brake signal is only used to prevent video in motion. If your unit doesn't have video, just connect it to ground.
It does have video. DVD/TV. and i wanna be able to watch as i drive. then should i just skip connection the parking brake signal?
 

·
Registered
Joined
·
6,767 Posts
It probably blocks the video when the parking brake is not engaged. Try it with a switch, you just have to figure out if grounded or not grounded makes the unit think that the parking brake is engaged.
 
1 - 8 of 8 Posts
Top