Audi Forum banner

1 - 20 of 20 Posts

·
Registered
Joined
·
402 Posts
Discussion Starter · #1 ·
For an Audi A5 I search the part number to get the display of the APS on the screen.

The car has only rear sensors and the owner wants to get the display on the screen of the MMI.

I have checked the car yesterday and I get this information:

Log (software):: 8K0 919 475 D Mat (hardware):: 8K0 919 475

Somebody knows?

Thank's.

Pascal / FRANCE
 

·
Registered
Joined
·
402 Posts
Discussion Starter · #3 ·
Thank's Paul H. So it is not possible to activate it?

Pascal,
 

·
Registered
Joined
·
279 Posts
No it is not possible to activate with some control moduls, you must have APS control module and activate it, and coding for rear sensors only.

I don't know part number but ETKA can help you.
 

·
Registered
Joined
·
402 Posts
Discussion Starter · #6 ·

·
Registered
Joined
·
402 Posts
Discussion Starter · #8 ·
Sorry. Now I think it is good!

Bye, Pascal / FRANCE
 

Attachments

·
Registered
Joined
·
7 Posts
Hi paul I have module endig in letter G can this be fitted & coded to alow graphic support & if so can you suplly VAG codes ??
Thanks Golfdeeko
 

·
Registered
Joined
·
402 Posts
Discussion Starter · #11 ·
G is for rear and front sensors. For me I think it is the letter F or H (7X1 only rear sensors).

Bye, Pascal / FRANCE VAGCOM
 

·
Registered
Joined
·
287 Posts
I have the APS Advanced (with Back-up Cam) - I don't know if this can help you??

Address 10: Park/Steer Assist (J446) Labels: 8K0-919-475.clb
Part No SW: 8K0 919 475 E HW: 8K0 919 475 A
Component: PARKHILFE 8K H06 0020
Revision: 11001001 Serial number: 52840832402471
Coding: 300103
Shop #: WSC 06335 000 00000


Address 6C: Back-up Cam. Labels: 4L0-910-441.lbl
Part No SW: 8T0 907 441 B HW: 4L0 907 441 A
Component: J772__Rearview 0070
Revision: --H12--- Serial number: 525PA8-J8Y90KP
Coding: 1021007
Shop #: WSC 06335 000 00000
 

·
Registered
Joined
·
287 Posts

·
Registered
Joined
·
279 Posts
OK try it on your car and write about it here.

I write comments only after I have some practical experiences with the problem, not just after reading forums only...

In my own eperience, it is impossible to activate graphics in MMI by VCDS using 475B module, the same info I have found in thread on motor-talk.de, sorry.
 

·
Registered
Joined
·
1 Posts
For an Audi A5 I search the part number to get the display of the APS on the screen.

The car has only rear sensors and the owner wants to get the display on the screen of the MMI.

I have checked the car yesterday and I get this information:

Log (software):: 8K0 919 475 D Mat (hardware):: 8K0 919 475

Somebody knows?

Thank's.

Pascal / FRANCE
did u solve it yet?if not may i have the vin code to see if we can help,we are a modification work shop
 
1 - 20 of 20 Posts
Top