Audi Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
578 Posts
Discussion Starter · #1 ·
I want to change my cheap steeringwheel to a leather one, with multifunction.

Anyone done this for a A6? I've seen a lot of this for A4, but not A6.

Since the MF wheel also is 4-spoke, the airbag can be used as well I think?

And I probably need some relays of some kind?
 

·
Registered
Joined
·
578 Posts
Discussion Starter · #3 ·
What about the Infotaionment

After installing RNS-e, I've learned that the car didn't have infotainment CAN-BUS (at least not the instrument cluster).

(this has been covered in a few other post's, but long story short- I had to use a can-bus adapter...)

How would this affect the install? (the install was quite complicated I noticed, 74 pages???? :shock: )

But i really want those buttons though... :)
 

·
Registered
Joined
·
996 Posts
If you needed to use a canbus emulator for the RNSE then, there is probably a good change that you will not be able to emulate the [infotainment] canbus signals for the MFSW in a C5. This is the downside to those who are forced to use a canbus emulator -- no ability to integrate any other OEM modules, options etc. Just basic RNSE and CDC control. Sorry.

We don't hear about this too much...so it could be possible....just not sure.

Good luck!
 
1 - 4 of 4 Posts
Top