Audi Forum banner


1083 Views 1 Reply 2 Participants Last post by  craigyb
I recently got a VAG-COM cable so I could recode my car for the RNS-E.

I went through the setup process and when i go to
STG 17 (Instrument cluster) -> Adaptation -> Function 10 -> Channel 62

I get an error :( "channel 62 not present"

I am running the latest version of the ross-tech software and have the correct can bus vag-com cable....

Has anyone come across this in the past or is there a different channel for a 2005 A3 other then 62???


1 - 2 of 2 Posts
You dont need to programme that channel on the A3

You need to programme the CAN Gateway to tell it you have RADIO and NAVIGATION, Use the long coding helper to add those items in the coding.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.